Which Music Player Apps Will Advance Automatically From One Song To Next On Samsung Galaxy S5

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

[APP][5.0+][v3.5.8] BubbleUPnP - UPnP/DLNA/Chromecast Control Point and Renderer

Thread starter bubbleguuum
Start date Jun 10, 2011

#16,121

Just encountered a playlist anomaly (bug). Had several songs queued, mistakenly enqueued one of them again, which was added to the bottom of the playlist as it should. I then edited the playlist and tried to remove that bottom one, however, it deleted the one higher up, so now the playlist was out of order.
Thanks as always for your great app, and the frequent updates.

@samnada

Having the same track multiple times in the Playlist tab is a long standing bug. It's rather tricky to fix and the fix could cause other more severe problems, so I left this one as it is.

#16,122

@samnada
Having the same track multiple times in the Playlist tab is a long standing bug. It's rather tricky to fix and the fix could cause other more severe problems, so I left this one as it is.

Ok, understand. Not a big deal, only found it after years of use, and wouldn't trade a fix for something worse.

Thanks.

#16,123

I've just been putting together a system for someone comprising MinimServer, BubbleUPnP server, BubbleUPnP and Sonos, and whilst I was taking him through it the BBC MPEG DASH streams were stuttering, playing about 10 seconds followed by a few seconds of silence, and repeating.
To narrow things down I tried adding the URL directly into BubbleUPnP and playing to the local renderer, and whilst it wasn't as often, I found I got 19 seconds of radio followed by 41 seconds of silence, repeating.
I don't listen to radio much myself, but I know this was working at some point, and I don't have old apk's to try to see if I could narrow it down (assuming it's on the app side of things).

The url I'm trying to play is:

Thanks in advance.

#16,124

Setting the 'Decode audio to PCM for' in BubbleUPnP server to 'Never' sent the stream direct to Sonos and everything played correctly.
The definition of the stream in MinimServer is [R1;aac,48000], but looking at the Sonos speaker 'info' in BubbleUPnP, it announces that it supports M4A but doesn't mention AAC directly (but does mention MPEG-DASH), is this why it's being decoded to PCM?

#16,125

@TadMorose
I will fix it properly but in the meantime, disabling 'More > Gear icon > COntrol > Android 11+ Notification' should fix it.

Thank you for fixing the issue...

#16,126

Tried to download some files from Dropbox to my Samsung using the app for the first time in a couple weeks and they were all failing. This normally happens when I run out of storage, but I still have 30GB+ free. I went to Settings > Downloads > Download Folder and there's a big message at the top that says "Can't use this folder. To protect your privacy choose another folder." I selected the same BubbleUPnP folder (/storage/emulated/0/BubbleUPnP), hit the "Allow BubbleUPnP to access files in /BubbleUPnP" button. And downloads failed again. I created a brand new folder, and I'm still seeing that "Can't use this folder" message. I can playback anything already downloaded to the device, but it's like the app can't write to it for some reason.

Any ideas?

#16,127

Unless I missed something, the use of user certificates for authentication (for example in connection with HAProxy) is not supported in the app so far. Are there any plans to introduce this feature in upcoming versions?

Regards Jürgen

#16,128

Dear @bubbleguuum, as I upgraded my Synology DS218j NAS to DSM 7 I learned from https://www.bubblesoftapps.com/bubbleupnpserver2/docs/nas_install.html that there is no package of BubbleUPnP Server yet. As this NAS does not run Docker I am unable to install and run a BubbleUPnP Server, which I desperately need to create OpenHome Renderers of my Chromecast Audio devices. Will there be a package in the future, as more and more users will update to DSM 7? It would be great...!

#16,129

I cannot use BubbleUPNP (paid version from amazon appstore) since I upgraded my Pixel 3a to Android 12.
When I start the app I have a popup named "App update required" with this msg : "Please update this App from the Amazon Appstore" and 2 choices : "Quit" and "Update".
" Quit" does not quit : it just puts the app in the background.
"Update" leads me to the Amazon Appstore where there is no update available. Moreover, BubbleUPNP is listed as 'incompatible with my device'.

The funny thing is that I can use the 'notification controls' of BubbleUPNP to control the app : increase/decrease volume, previous/play/next. But I'm stucked in my last playlist.

So the update needed is to remove the blocking update warning (and list the app as compatible)

Last edited: Oct 25, 2021

#16,130

I can not access my shared windows folders ( SMB ) How can I access my shared folder

Attachments

Screenshot 2021-10-24 130135.jpg

#16,131

Recently I have been having problems with playback with no changes in setup. Android app says "Warning: media may not be supported by Chromecast. The LAN media cannot be transcoded by the remote BubbleUPnP server." It starts loading, buts stops. I have transcoding enabled, and server is running fine. It may start playing, but if I stop and restart, I get error messages. Using Serviio server running fine.

I disabled internet access on server and removed server info in Android app as I was writing this, and now it's fine.

#16,132

Recently I have been having problems with playback with no changes in setup. Android app says "Warning: media may not be supported by Chromecast. The LAN media cannot be transcoded by the remote BubbleUPnP server." It starts loading, buts stops. I have transcoding enabled, and server is running fine. It may start playing, but if I stop and restart, I get error messages. Using Serviio server running fine.
I disabled internet access on server and removed server info in Android app as I was writing this, and now it's fine.

The problems of files having played fine before on Chromecast and now I get no playback with error message in BubbleUPnP app or stutter and ffmpeg using 100% of 8 core 4 gHz CPU on server is because of Serviio. Even before I tried to update to v2.2. I disabled Serviio and using SimpleDLNA server instead and no problems. But is video quality worse than with Serviio?

Last edited: Oct 27, 2021

#16,133

FEATURE REQUEST:

First off, sorry if this has been asked before. I searched this thread but didn't see anything relevant in my results.

I'd like to be able to toggle an option in Settings for a second

~~Playlist~~ Library tab. I binge watch TV episodes but like to listen to music between episodes (both coming from my Windows libraries). This is currently a pain in BubbleUPNP because I have to back all the way out of Video and then go into Music, losing my place in the Video library in the process (or maybe I'm just dumb and I'm doing it all wrong, wouldn't be the first time). Then I have to reverse that all for the next TV episode. It would be so much nicer to just be able to switch from a Video ~~Playlist~~ Library tab to a Music ~~Playlist~~ Library tab and vice-versa. Is that possible?

Love the app. Been using it for a few years for pretty much all of my home media. Thanks so much!

Last edited: Oct 28, 2021

#16,134

I am running BubbleUPNP on my Android 8.1 mobile.

I'm using the Arcam AVR390 as the renderer, connected to Minimserver on my Synology DS215j.

Everything is up to date.

Bubbleupnp is not working correctly and I'm not sure what is causing it.

The 'seekbar' does not work at all but it does show the length of each track that is played at the end of the seekbar.

Playback stops after a few tracks, sometimes it's 4 tracks, other times it's after a few more tracks than 4.

The slider for volume works but the +/- for volume does not. I would rather use +/-.

Any idea what I can do to get this to work properly? Could it be the Arcam that is the problem?

#16,135

I'm sorry, if it was already asked and perhaps answered.
The album covers are getting so small when turning the phone in landscape mode. Is there a setting to keep them in same size than in portrait mode?

#16,136

One problem, different to my question above.

I've been testing the Bubbleupnp app (as explained above) with the Arcam AVR390.
I normally only use Bubbleupnp with my Lumin T2.
I turned my Lumin T2 on to play some music and my playlist is empty. I tried importing a saved export file, it says it was imported successfully but my playlist is still empty.
Any idea why the playlist is still empty?

If I can't import the playlist, is it possible to open up the exported file to see my playlist?

#16,137

Hello,
I'm facing strange issue with Qobuz and BubbleUpnpServer latest release (running on Raspberry Pi).
Same problem occuring with either Linn or Lumin as Ipad application.
Here is the problem description :
- I'm launching an album
- It plays good, until there is no more sound
- checking the "playlist", the song is still running and running again .... even if the song is 3mn long, the song reached 7mn and more without any sound and without skipping to the next song.

Problem does not seem to happen using MConnect.

I have run BubbleUpnpServer for years without any issue in the same context, except the fact that I have recently switch from Tidal to Qobuz.

Thanks for your help and support.

#16,138

Hi,

I can't connect to my BubbleUPnP-Server because it tries to connect via IPv6, but the server is just listening on IPv4.

Any advice appreciated how I can connect to the server (but I need IPv4/IPv6 dual stack).

Thanks in advance.
Regards,
meiser

#16,139

@jigsaw_rh

Can you trigger this issue again, then send me (at [email protected]) the BubbleUPnP Server log file.
It's named BubbleUPnPServer.log.0 and usually found in the install directory.

Hello,
I'm facing strange issue with Qobuz and BubbleUpnpServer latest release (running on Raspberry Pi).
Same problem occuring with either Linn or Lumin as Ipad application.
Here is the problem description :
- I'm launching an album
- It plays good, until there is no more sound
- checking the "playlist", the song is still running and running again .... even if the song is 3mn long, the song reached 7mn and more without any sound and without skipping to the next song.
Problem does not seem to happen using MConnect.

I have run BubbleUpnpServer for years without any issue in the same context, except the fact that I have recently switch from Tidal to Qobuz.

Thanks for your help and support.

#16,140

@meiser

BubbleUPnP Server only supports ipv4. However, I'm not sure why in that error in the screenshot Android is using ipv6 to connect except of ipv4 (assuming you did not disable ipv4)...

Hi,
I can't connect to my BubbleUPnP-Server because it tries to connect via IPv6, but the server is just listening on IPv4.

View attachment 5448209

Any advice appreciated how I can connect to the server (but I need IPv4/IPv6 dual stack).

Thanks in advance.
Regards,
meiser

Similar threads